Posts By: Admin
What’s The Difference?
There’s a huge difference in between Tracked and Roller garage doors, and it’s not just to do with the way they look. Tracked and Roller doors are so called because it describes the method they open, and these 2 could not be more opposite. Tracked garage doors become part of the Up & Over group of garage doors. These are common and you’ll be familiar with the way they look: a single panel door which opens by pulling the door outwards and up so that it sits in a horizontal position at the top of the garage when open. Tracked doors are fitted with tracks or rails along the ceiling of the garage, allowing the user to press the complete door panel back into the garage space when in the full open position. This is usually seen to be a cleaner and much safer style of garage opening, and it’s popular for larger-sized doors due to the assistance it provides to the panel. It also indicates that these doors can be automated relatively quickly– something which basic Canopy Up & Over doors can not.
Roller garage doors do not open in the standard Up & Over fashion. In fact, they aren’t even made as one strong panel. Instead, the door is constructed from narrow horizontal slats which mesh solidly when the door is in the closed position, developing a strong, consistent door panel. When unlocking, the ‘slats’ ended up being versatile in order to roll around themselves in a cylinder at the top of the garage opening. This implies that the door moves directly up-wards during opening, instead of kicking out and using up extra room. With a Roller garage door, you can park right up to your garage and still have the ability to open your door unrestricted. They come automated as basic, unlike with the Tracked doors, which only provide this as an upgrade.
Why Choose Tracked?
Tracked garage doors are available in both galvanised steel and strong timber versions, with a wide variety of styles to choose from. It’s also possible to obtain the Garador Guardian variety in a Tracked opening mechanism, which provides you enhanced security through Secured by Design approved garage door panels. While this is fantastic for those who may reside in an area with a high rate of criminal activity, the standard garage doors we offer have wholly adequate security features and high quality locking mechanisms.
Tracked garage doors can be both manual and automated, and you’re able to select this at any time, as it’s simple to transform the door at a later date should you want to. Strong wood, while more costly than galvanised steel, is a natural insulator and will keep your garage at a comfy temperature level all year round. This is especially important for those who use their garage spaces to operate in or as a hobby space, and also for those whose garage is connected to their primary house.
If you like the standard Up & Over design of garage door but you live beside a hectic road, in an exposed, windy location or if you understand you want to transform your door to automated opening at some time in the future, then a Tracked door is for you. As Tracked garage doors do not stick out of the opening when fully open, they can not be blown off balance by strong winds and other ecological tensions.
Why Choose Roller?
Roller garage doors are a fairly new product for domestic homes, however they’ve been popular in other sectors for decades. Due to some fantastic advancements in the innovation used to construct these doors, they’re becoming very popular with homeowners all over the UK. Built from insulated aluminium, these doors will keep the temperature inside your garage from extremes of cold and hot– best for homes where the garage is attached to the primary home. Aluminium, as you most likely already know, is a light metal which does not rust and therefore is longer lasting than other materials.
As the door opens by moving vertically upwards, you don’t need room outside of the garage in order to enable the opening swing. This is ideal for homes which do not have a lot of drive space or where your cars and truck takes up almost all of the space within your garage. The specific slats ‘unlock’ from each other to be able to roll around themselves in a cylinder shape above the opening, providing you plenty of space within your garage– including on the ceiling.
Is your garage door sagging, practically impossible to raise, or just regularly breaking down? If it is, perhaps now is the time to replace it with a brand-new one that’s easy to run and preserve. This garage door buying guide will help.
Not just can a brand-new garage door provide safe, secure, and easy access to your garage, but it likewise can restore and revitalize your house’s general appearance, especially from curbside. A new garage door can give your home immediate curb appeal.
Taking advantage of today’s innovations, the materials utilized for a lot of today’s garage doors can endure weathering for several years, including steel, wood composites, fiberglass, vinyl, and aluminum. Wood, though not as durable as most other manufactured materials, stays a preferred, too. Though each of these has its benefits, consumers overwhelmingly prefer steel and wood doors.
Wood stays a classic because of its natural charm, availability, and simple customization. However it just doesn’t last as long as other materials and therefore requires relatively constant care.
Many individuals choose wood for its natural appearance, cost, and simple tooling. But, because wood expands and contracts and can warp and crack as it weathers, it demands routine upkeep– repainting or refinishing every couple of years.
Tilt-Up Wood Garage Doors
The most convenient to develop and most cost effective type of door is a tilt-up wood door. In many cases, a carpenter constructs a tilt-up wood door right in the driveway by using a skin of outside plywood– usually 3/8 inch thick– to a frame of Douglas fir, spruce, or a comparable softwood. In some cases, siding that matches your house covers the frame.
This type of flush construction is rather strong, stable, and budget-friendly.
Roll-Up Wood Garage Doors
Sections of roll-up wood doors may have either flush or panel construction. Flush areas are made by attaching a plywood panel over a wood frame, like a little variation of the flush door described above. For panel doors, manufacturers fit numerous different, rectangular panels into a wood frame. The skeletal structure is built of fir or some other common softwood; panels are made from a range of products.
Panels for a door that is suggested to be painted may be flat surfaces of plywood or hardboard, or they might be three-dimensional raised or recessed panels. Cladwood, made from composites with resin-impregnated overlays, or wood lookalikes such as Masonite’s SureWood raised panels, are typically utilized for the three-dimensional type.
Appearance-grade wood doors– those that are implied to be stained instead of painted– have solid-wood panel inserts. These doors may be all cedar, redwood, or might have softwood frames with oak, mahogany, or other hardwood panels. When buying among these, discover whether the panels are made from a single, strong piece or from numerous widths edge-glued together (because the joint between glued-up lengths might show).
Steel garage doors have ended up being incredibly popular since they’re strong, relatively low-cost, and low upkeep. In addition, cutting edge steel garage doors do an exceptional job of imitating the appearance of wood.
Steel garage doors are the best in security and toughness.
Steel garage doors are much more powerful and more secure than wood, aluminum, or fiberglass ones. Thanks mostly to brand-new technologies that allow for embossing metals with wood-grain patterns, plus brand-new long lasting finishes, today’s steel doors match the look of wood without the maintenance headaches.
Styles mimic those of wood doors– flush, recessed panel, and raised panel. You can likewise get metal doors with a horizontal, ribbed style.
Steel Garage Door Benefits
Steel doors will not warp, crack, delaminate, or break down due to the impacts of weather condition. And, because many are made of hot-dipped, galvanized steel that is vinyl dressed or given a baked-on polyester finish, they don’t rust or need repainting as frequently as do wood doors. Most warranties guarantee the door won’t rust for as long as you own the house, but they do not guarantee against fading. On the disadvantage, steel does dent and can be tough to repair.
Premium-quality steel doors have cores of stiff polystyrene or polyurethane foam insulation. Not just does this insulation help keep the garage warm in winter and cool in summer season, it also makes the door lighter, quieter, and simpler to run. In addition, it is less likely to sag with time.
Fiberglass & Aluminum Garage Doors
Fiberglass garage doors actually consist of an aluminum frame with fiberglass sections. Like aluminum, fiberglass is really light-weight.
Other benefits of fiberglass include its translucency and its resistance to the effects of salt air. Because of these advantages, fiberglass doors might work best for places requiring excellent light transmission or resistance to destructive ocean environments.
However, for more traditional uses, fiberglass isn’t really a preferred material since it is a poor insulator, it yellows with age, and it breaks relatively easily, specifically when cold.
Aluminum garage doors have enjoyed many of the exact same advances as steel garage doors– wood-grain embossing and durable finishes are normal. Aluminum single-piece tilt-up doors are fairly popular due to the fact that they are very light-weight, will not rust, and are relatively economical. Sadly, aluminum has a significant drawback– it’s very quickly dented.
With heating and cooling costs continually on the rise, more and more house owners are taking a look at areas to insulate in their homes to help keep these costs down. One of the locations regularly looked at in terms of insulating is the garage door.
The garage door is frequently viewed as a kind of window wall– or bad wall– it lets air in, which alters the temperature level inside the garage. When your garage is connected to the rest of your home, this, in turn, leads to temperature changes that could be prevented.
But is insulating the door truly the answer?
Types of Garage Door Insulation
Garage doors are meant to operate. They need to open and close on a regular basis, typically hinging or folding at several various points. So bat insulation or spray foam insulation aren’t going to work well on the door. Yes, you may find some types that are suggested to be used in this area, but the consistent movement of the garage door will eventually cause them to flake, pull apart and fail, which means that you’re looking at insulating your door again and again.
A better option is to purchase a garage door that is currently insulated. Instead of a metal door that conducts heat and cold easily, insulated doors help stop some of the energy loss from the garage. If you’re intending on changing your garage door, checking out an insulated model is probably a good idea.
Reasons to Insulate the Rest of the Garage Instead
Even if you take the time to insulate your garage door, or purchase a pre-insulated door, you have a few other problems to handle in your garage.
The floor of your garage is most likely built on a slab, which suggests that it isn’t really insulated and is transferring in cold air during the winter that is then transferred to your house. The concrete walls of your garage probably aren’t doing your home any favors either, so even if you put in the time to insulate the garage, you probably won’t notice much of an improvement on your energy expenses.
Rather, consider insulating your home from your garage. Put insulation into the ceiling of the garage so it helps stop the loss of energy to the space above. Ensure there is a lot of insulation on the interior wall of the garage where it connects to the rest of your house. By doing so, even if the temperature level fluctuates inside the garage itself, it isn’t really going to affect the temperature level inside your home, or raise your energy bills.
The Exception to the Rule
While a lot of contractors will tell you to insulate the transfer points from the garage to your house itself, there are still times when you might wish to further insulate the garage door, along with the walls and flooring of the garage. If you utilize your garage as living space, rather than as storage or energy space, then you will most likely be heating up or cooling the location. So if you use your garage as a work area, craft space, or daycare, you must consider it as a part of the house, and not seal it off. In this case, the garage door is a big energy sink, which must be insulated to help keep the interior comfy, while lowering your energy costs.
The Bottom Line
If you utilize your garage as storage, you’re most likely much better off leaving the door alone and insulating the walls and ceiling of your garage instead.
If you utilize your garage as living space, however, it’s probably worth your while to insulate the door. Make your decision based upon your lifestyle and needs and understand you’re doing your finest to keep your energy expenses down.
Garages are hardly ever served by cooling or heating systems, even when they are connected to the house. And while most people do not concern themselves about cooling a garage in summer, if you utilize your garage area as a workshop to deal with vehicles or house upkeep projects, or if it serves as a center for working on gardening tasks, a garage in summer can be a quite undesirable place to work if it is not cooled.
You have a number of choices for cooling a hot garage, depending upon your local conditions. Garages in areas with a moderate summertime can get away with an exhaust fan that offers big air changes throughout the day, but if your summertimes are hot, muggy or both, you may be considering a full-blown window cooling unit as the very best service.
Benefits to Air Conditioning the Garage
Not only will adding cooling to your garage make it a more enjoyable location in the summer season, it can help with your home air-conditioning expenditures. When you cool your garage, it helps to keep the rooms surrounding the garage cooler, as well. For example, if you have an attic room over your garage, that struggles to remain cool in the summer, getting rid of the heat from the lower part of the garage will make a big difference.
Other interior spaces also benefit, and it might ultimately cut your energy costs. In the same way that insulation keeps warm air from penetrating your house, the pocket of air inside your garage can assist in slowing the absorption of outdoor heat into the house. In an uncooled garage, hot air slowly creeps into your house through a shared wall or door, raising indoor temperature levels and forcing your air conditioning unit to work harder.
Caution Regarding Central Air Conditioning
Whatever you do, don’t use the house a/c system to cool your garage. This might look like a logical solution, and numerous property owners have tried to extend central air conditioning into a garage just by adding a length of ductwork through the side of the home and into the garage.
It is a bad idea for numerous reasons:
Your garage typically will not have an air return back into the HVAC system, and when a central air conditioning duct is extended into a garage, it can produce an irregular pressurization in the garage. This forces the remainder of the home to end up being slightly depressurized due to the fact that the air in the garage can’t get back to the air return. While this modification in pressure cannot actually be noticed, except maybe by the minor breeze you pick up when the door to the garage is opened, it poses problems. Negative pressure in your house needs to be relieved in some way, and what typically occurs is that your house will draw air in from outside. Outside air bypasses the HVAC filter system, enabling toxins and irritants to build up within. And it also makes it harder to keep your house cool, considering that there is a consistent flow of warm air being available from outdoors.
The other enormous downside to connecting the whole home a/c unit to the garage is the potential for unsafe fumes to enter your house through the ductwork. Whether you’re dealing with the lawn mower or just heating up the car, all sort of fumes are in your garage at any provided time. A few of them simply smell odd, but others, like carbon monoxide gas from exhaust, can be fatal.
Garage door remote controls are handy and common. They are the “essential” that a lot of us use to get in and out of our homes. They cause few problems, are easy to fix when they do, and can be changed at little cost.
But what, exactly, should you do when your remote control button cannot perform its task? Or where do you look when you need a replacement for the remote? Or when should you think about replacing the entire garage door opener?
Good concerns all. Here are some answers to questions about repair work, replacement and updating your garage door remote.
Garage Door Remote Not Working?
When the wall-mounted button works but the remote does not, you most likely need to either reprogram the remote or change the battery.
Most standard garage door openers require just a couple of simple steps to program. Normally, you hold down the open button on the remote while pressing and releasing the programming button, then release the open button when the garage door opener light comes on.
There are some problems with garage door remotes that appear to defy solutions. In some cases individuals find that their garage door will open on its own. You might be sitting in the living-room, or away at work, and the door suddenly opens. The reason for some of these weird incidents might surprise you.
It seems that the federal government (at any level) can utilize the very same radio frequencies as garage door remotes for emergency situation functions. In the process of using that frequency in an area, garage door openers nearby can be inadvertently opened at will.
See below for info on changing garage door remote batteries.
Garage Door Remote Apps
Yes, there is an app for that. At least there is at the moment for the iPhone. I have no doubt that apps will soon be offered for other mobile phones that enable you to open and close your garage with your phone. Extremely hassle-free, but make certain not to loose the phone.
Garage Door Remote Battery Replacement
Weird as it appears, many individuals forget that the thing powering their garage door remote is a battery or two inside. When the remote appears to quit working unexpectedly, the first thing to inspect is the battery or batteries.
To do so, you will have to get rid of a small screw or two on the remote and then pry it apart. If your remote does not have screws, you ought to be able to access the battery by moving the panel on the back.
Get rid of the battery or batteries. If your remote uses AA or AAA batteries, you probably have fresh ones lying around the house.
Smaller, round batteries may need a trip to a battery store or electronics shop. Replace the batteries and reassemble the remote.
Automatic garage door openers are a fantastic convenience, however they can also serve as a weak link in your garage security. Garage door openers are equipped with an emergency release lever, which generally has a cable hanging down. This lever is mainly ignored until such time as you lose power and can no longer open the garage door automatically. Pull the lever down, however, and you can raise the door manually.
That very same lever can also help you enter your house if you find yourself locked out. You can use a clothes hanger from outside to pull the lever inside. Once you do, you can lift the door.
Unfortunately, you are not the only one who can do that, and that’s where the matter of garage security comes in. Anyone with a clothing hanger can do the same thing. It’s a pretty simple method to break into a garage, and from there it can be even much easier to get into your house.
If you want to make this simple access a bit harder or remove all of it together, here are some ideas you may want to try for increasing garage security.
Increasing Garage Security
Disable the emergency release lever. In most cases, this is the best method to keep someone from using the coat hanger technique to break into your home.
Obviously, it also means that you won’t be able to get in this way yourself.
Remove the cord. The cord connected to the emergency release lever is a minor convenience when you have to trip the lever. It is likewise something fairly simple to grab onto from outdoors utilizing a clothes hanger.
Lock the release lever. On some garage door openers, you can utilize a plastic cable tie or some thin wire to tie the lever to the carriage assembly it is attached to.
The lever always has a hole in it (to connect the release cord) and some carriage assemblies have holes you can run the cable tie or wire through. If yours does not, you can drill a hole. The idea is that you simply have to make it practically impossible for a flimsy coat hanger to be able to pull the lever down, while, at the same time, enabling you to cut or remove your simple lock from inside the garage.
Cover the windows. It is a lot easier to use a clothing hanger to trip the emergency release lever if you can see what you are doing. Without a clear window to do so, the job needs more time and effort. Even frosted windows will increase garage security, with the added advantage of permitting light to get in.
Forget the automatic garage door opener. Going “old school” will get you added garage security however at the expense of benefit. Detach the garage door opener and utilize a manual lock to lock the door. This implies that you have to get out of the car when you get home, unlock the door and raise it yourself. Similar to the old days. It also means that someone without the key will not be able to do the very same thing.
Set up a wireless keypad. I have one of these and I utilize it often. Whether you’re locked out of your home, or you just want to enter into the garage without going inside or hunting for a remote, a wireless keypad is a terrific addition.
Inexpensive and easy to install, you simply set the keypad with your code. Then, raise the cover and enter the code and the door opens. Much easier than a clothing hanger, except for those who do not have the code. With a cordless keypad installed, you might feel more comfortable disabling the emergency release lever.
Set up movement sensing unit lights. Set up a motion sensing light or two over your garage door and you will minimize the opportunities of a nighttime break in through the garage. Most burglars are not too keen on doing their work under a bright light.
Secure the entry door to your home. Many people do not even have a lock on the door that leads from the garage into your house. That’s because they presume that the garage door offers all the security they need. But if someone gets into the garage, they will have problems entering the house if the door has a good deadbolt lock on it.
Consider this door just as you do all exterior entry doors in your house, and protect it appropriately.
Do not leave the garage door remote in the automobile. Or, if you do leave it in the car, make certain the doors are locked and the remote is not visible from outside. I understand that having that remote clipped to the visor is very handy, however it’s also an invitation for somebody thinking of getting into your home. A good way to keep the remote with you instead of with the car is to replace that clip-on remote with a small one that you can keep on your keychain. Consult the manufacturer or your garage door opener for information.
Turn off the power. Without electrical energy, your garage door opener will not work. During the night, or when you run out of town, you can easily cut the power by unplugging the opener or, if your opener is wired to a wall switch, flipping the switch.